[b]SD-PS Delivery from a project (T-code CNS0)[/b]

Logistics : PS

Moderators: Snowy, thx4allthefish

Post Reply
fsendy
Posts: 2
Joined: Mon Mar 17, 2003 9:57 pm

[b]SD-PS Delivery from a project (T-code CNS0)[/b]

Post by fsendy » Mon Mar 17, 2003 10:06 pm

Dear Sappers,

I would like to deliver components from a project or a network. But the system mentioned error log 'Enter a material or an item category' message VL 383. This components under a certain internal activity in the network. Does any one have experience of this ?

T.I.A

Ferdinand Sendy

fatman
Posts: 126
Joined: Thu Dec 12, 2002 1:23 am
Location: San Francisco

Delivery from project

Post by fatman » Tue Mar 18, 2003 3:53 am

Hi Ferdinand,

When did you get the error ?
First you should have materials in your project stock.
During CNS0 , you have to give network or proj def which have materials to be delivered.

FATMAN

Guest

Delivery from project

Post by Guest » Tue Mar 18, 2003 8:24 pm

Hi Fatman,

The errors came when I would deliver from project/network with CNS0
All the relevant materials already display in the system, somehow when I try to save it cause this error. Perhaps you could help me on this, FYI I use customer stock not project stock.
Thank you for your attention.

Best regards,
Ferdinand Sendy

fatman
Posts: 126
Joined: Thu Dec 12, 2002 1:23 am
Location: San Francisco

Delivery from project

Post by fatman » Thu Mar 20, 2003 11:47 pm

Hi Ferdinand,

I used project stock for my simulation and I could not simulate your error. Since my projects are not configured for customer stock , i could not do it.

If you can find some solution, please let me know.


FATMAN

Post Reply